1 3

DROSERA OUT – Adhesive Membrane for Exterior Joinery Sealing

DROSERA OUT – Adhesive Membrane for Exterior Joinery Sealing

  • CTB Certified.
  • Vapour-permeable.
  • Suitable for both renovation and new construction projects.
  • Strong adhesive power on all types of window frames and different masonry bases.
  • Can be covered with plaster or paint.
  • Can be applied at low temperatures.

Dimensions & Weight

  • 75 mm x 25 m / 0.75 kg
  • 100 mm x 25 m / 1 kg
  • 150 mm x 25 m / 1.5 kg
  • 200 mm x 25 m / 2 kg
  • 250 mm x 25 m / 2.5 kg
  • 300 mm x 25 m / 3 kg
  • 400 mm x 25 m / 4 kg

📄 Download the PDF (to be added on isolution website = Technical Data Sheet)

DROSERA OUT is composed of a non-woven, vapour-permeable membrane.

The membrane is self-adhesive over its entire surface, ensuring easy installation without the need for additional glue on masonry (it is important to always perform a test before final application).

DROSERA OUT can be covered with plaster or paint.


Key Advantages

  • Vapour-permeable.
  • Suitable for both renovation and new construction projects.
  • Strong adhesive power on all window frames and various masonry bases.
  • Can be covered with plaster or paint.
  • Can be applied at low temperatures.
  • CTB certified (wood components and systems).

IMPACT

  • Made in Europe 

APPLICATION

Fields of use
DROSERA OUT is designed for exterior sealing. The membrane is fully self-adhesive on one side, applied between the window frame and masonry, and features a protective PP layer slit lengthwise.

Instructions for use
Before installing DROSERA OUT, ensure the substrate is dry and free of grease to guarantee proper adhesion. The substrate must be stable and able to support the product.

  1. Carefully fill the space between the wall and the window with insulation.
  2. Apply a mechanically fixed profile at the top, combined with sealant (for non-removable façades).
  3. Use SEVE 310 to seal any gaps.
  4. Repeat the operation on all sides of the window you wish to seal.
  5. Apply SEVE SPRAY primer if the substrate is absorbent and/or rough.
  6. Roll out the sealing tape along the top of the window, leaving about 10 cm overlap on each side.
  7. Overlap the joints of the tape in the water flow direction.
  8. Remove the protective film.
  9. Carefully install the mounting tape, pressing it firmly into place.

Notes

  • Clean skin with water and soap.
  • Dispose of tape residues with household waste (according to local regulations).

Safety Guidelines
This product is not classified as hazardous under hazardous materials regulations or relevant EC directives.

View full details